Interested in the smallest LokSound decoder ever built?
At only 19.6 mm x 8.5 mm x 3.2 mm, the LokSound 5 Nano DCC can be used in virtually all vehicles of nominal sizes N and TT. It is a pure DCC decoder with open cable ends for free wiring, made for the North American and Australian markets.
Features
- Dimensions of 19.6 mm x 8.5 mm x 3.2 mm: the smallest LokSound decoder ESU has ever built
- Can be used in virtually all vehicles of nominal sizes N and TT
- Pure DCC decoder with open cable ends (single wires) for free wiring
- Made for the North American and Australian markets; supports RailComPlus and can also be used on DC layouts
- Please note the LokSound 5 Nano DCC decoder does not come with a speaker
- 14 to 128 speed steps, 2- and 4-digit addresses, and up to 32 functions can be triggered
- RailComPlus®: decoders register fully automatically at a suitable digital command station
- Masters all DCC programming modes; thanks to RailCom®, CV values can be read out on the main track with suitable control panels; auxiliary registers for control panels limited to CVs 1-255
- Detects Märklin® braking sections, ZIMO® HLU/ZACK commands and the Lenz® ABC system; braking with DCC brake blocks or DC voltage; stops with a Selectrix® brake diode
- Automatic ABC shuttle for commuting between two stations
- Can be used on analog DC layouts; switches "on-the-fly" fully automatically between operating modes, with nothing to adjust most of the time
- Plays up to 12 sound channels simultaneously, each resolved with up to 16 bit / 31250 kHz, for hi-fi quality
- Class D audio output with up to 3W output power, for speakers between 4 ohms and 32 ohms impedance
- 128 Mbit sound memory
- Volume of each individual sound can be adjusted separately; super-flexible sound engine without a rigid schedule
- 6 reinforced function outputs as well as a logic-level output as a solder pad
- All important lighting functions available, with the brightness of each output set separately
- Controls the automatic start-up and disconnection when uncoupling for ROCO®, Krois® and Märklin Telex® couplings
- Variable PWM clock frequency from 10 kHz to 50 kHz for super-quiet operation, especially with bell-armature motors
- Load control adaptable to difficult cases with up to 10 CVs and automatic calibration of the decoder to the motor with the unique "Auto Tune" function
- Delivers up to 0.75 A motor current
- Outputs protected against overload
- Please note that LokSound decoders ship without a preloaded sound file (they are blank)
- If you do not have a LokProgrammer interface, we can load the sound file of your choice onto your decoder at no additional charge
- You have two options: tell us what model of locomotive you have (e.g., EMD SD40-2, MLW M630) and we will select the right file for you, or give us the item number (e.g., S0821) of the sound file you want from the ESU website
- To let us know your choice, add a note in the "Comments" section when entering your payment details at checkout, or send an email referencing your order number to info@modelebt.com
- To listen to the sound samples and choose your file: LokSound sound files for North American and Australian locomotives or LokSound sound files for European locomotives
- You can also purchase an ESU LokProgrammer interface; it is not required for regular programming (address, CVs, etc.) of ESU decoders
- Made by ESU
Description
Interested in the smallest LokSound decoder ever built?
At only 19.6 mm x 8.5 mm x 3.2 mm, the LokSound 5 Nano DCC can be used in virtually all vehicles of nominal sizes N and TT. It is a pure DCC decoder with open cable ends for free wiring, made for the North American and Australian markets.
Features
- Dimensions of 19.6 mm x 8.5 mm x 3.2 mm: the smallest LokSound decoder ESU has ever built
- Can be used in virtually all vehicles of nominal sizes N and TT
- Pure DCC decoder with open cable ends (single wires) for free wiring
- Made for the North American and Australian markets; supports RailComPlus and can also be used on DC layouts
- Please note the LokSound 5 Nano DCC decoder does not come with a speaker
- 14 to 128 speed steps, 2- and 4-digit addresses, and up to 32 functions can be triggered
- RailComPlus®: decoders register fully automatically at a suitable digital command station
- Masters all DCC programming modes; thanks to RailCom®, CV values can be read out on the main track with suitable control panels; auxiliary registers for control panels limited to CVs 1-255
- Detects Märklin® braking sections, ZIMO® HLU/ZACK commands and the Lenz® ABC system; braking with DCC brake blocks or DC voltage; stops with a Selectrix® brake diode
- Automatic ABC shuttle for commuting between two stations
- Can be used on analog DC layouts; switches "on-the-fly" fully automatically between operating modes, with nothing to adjust most of the time
- Plays up to 12 sound channels simultaneously, each resolved with up to 16 bit / 31250 kHz, for hi-fi quality
- Class D audio output with up to 3W output power, for speakers between 4 ohms and 32 ohms impedance
- 128 Mbit sound memory
- Volume of each individual sound can be adjusted separately; super-flexible sound engine without a rigid schedule
- 6 reinforced function outputs as well as a logic-level output as a solder pad
- All important lighting functions available, with the brightness of each output set separately
- Controls the automatic start-up and disconnection when uncoupling for ROCO®, Krois® and Märklin Telex® couplings
- Variable PWM clock frequency from 10 kHz to 50 kHz for super-quiet operation, especially with bell-armature motors
- Load control adaptable to difficult cases with up to 10 CVs and automatic calibration of the decoder to the motor with the unique "Auto Tune" function
- Delivers up to 0.75 A motor current
- Outputs protected against overload
- Please note that LokSound decoders ship without a preloaded sound file (they are blank)
- If you do not have a LokProgrammer interface, we can load the sound file of your choice onto your decoder at no additional charge
- You have two options: tell us what model of locomotive you have (e.g., EMD SD40-2, MLW M630) and we will select the right file for you, or give us the item number (e.g., S0821) of the sound file you want from the ESU website
- To let us know your choice, add a note in the "Comments" section when entering your payment details at checkout, or send an email referencing your order number to info@modelebt.com
- To listen to the sound samples and choose your file: LokSound sound files for North American and Australian locomotives or LokSound sound files for European locomotives
- You can also purchase an ESU LokProgrammer interface; it is not required for regular programming (address, CVs, etc.) of ESU decoders
- Made by ESU