Discover over 5000 products in stock!

For a limited time, get free shipping on orders of 500$ and more!

Hardware

Hardware

The small hardware that saves a project: miniature screws and nuts, bolts, washers, springs, steel rod and brass wire, fine chain and assorted fasteners, in sizes suited to modelling. Essential for repairing a locomotive, securing a building, assembling a module or fabricating a part you can't find anywhere, and always handy to keep within reach at the workbench. If you're after a specific thread or dimension, bring us the original part: we'll help you find the equivalent.

Sold Out
Walthers – #00-90 Brass Hex-Head Machine Screws, 1/4
6.95 $ CAD
6.95 $ CAD
Need small hex-head hardware for your builds?These Walthers brass hex-head machine screws (#00-90 thread) are perfect for your models and any device that calls for miniature hardware. Walthers offe...
Sold Out
Walthers Tools – Steel Self-Tapping Pan-Head Screws #2 x 3/16
7.95 $ CAD
7.95 $ CAD
Need screws for your modeling projects? These WalthersTools steel self-tapping pan-head screws, size #2 x 3/16", cut their own thread in soft metals and plastics to fasten your parts securely. 24-p...
Micro-Mark Railroad Control Panel Tape 1/8 Inch
16.95 $ CAD
16.95 $ CAD
Want to lay out your track diagram cleanly on your control panel?This Micro-Mark tape, 1/8 Inch wide, is used to represent tracks and circuits on a railroad control panel. It applies directly to th...
Poids d'équilibrage de roue autocollants QuikTab QuikStik, segments de ¼ oz
2.95 $ CAD
2.95 $ CAD
Do your wheels vibrate because they are poorly balanced?These QuikTab QuikStik balancing weights are applied simply by sticking them onto the wheel. The strip consists of 12 ¼ oz segments that you ...
Tampons de rechange pour wagon nettoyeur de voie CMX Clean Machine HO
8.95 $ CAD
8.95 $ CAD
Is the pad on your CMX track-cleaning car worn out and leaving streaks?These replacement pads are made for the CMX "Clean Machine" HO scale track-cleaning car. The pad mounts under the car and scru...
200 clous de cuivre Corel de 10 mm à tête ronde pour maquettes de bateaux en bois
11.95 $ CAD
11.95 $ CAD
Building a wooden ship model and need fine nails?These Corel 10 mm copper round head nails are used in building wooden ship models. Use them to pin the planking (the strips) against the hull while ...
Corde à piano (music wire) K&S en acier trempé 0,047 po, 36 po
1.49 $ CAD
1.49 $ CAD
Need a stiff, strong steel wire for your builds?K&S Engineering music wire is a spring-tempered steel wire, known for its stiffness and excellent resistance to bending. Perfect for modeling, me...
Sold Out
K&S Engineering – Brass Strip 12 x 1/2 in (300 x 12.7 mm), .016 in (.41 mm) Thick
2.95 $ CAD
2.95 $ CAD
Need flat brass for your modeling or DIY projects?This K&S Engineering brass strip measures 12 in long by 1/2 in wide (300 x 12.7 mm), with a thickness of .016 in (.41 mm). Brass cuts, bends an...
Sold Out
K&S Engineering – Brass Strip 12 x 1/2 in (300 x 12.7 mm), .025 in (.64 mm) Thick
4.95 $ CAD
4.95 $ CAD
Need flat brass for your modeling or DIY projects?This K&S Engineering brass strip measures 12 in long by 1/2 in wide (300 x 12.7 mm), with a thickness of .025 in (.64 mm). Brass cuts, bends an...
Kadee #256 HO – Insulated Nylon Screws 2-56 x 1/2
5.49 $ CAD
5.49 $ CAD
Cleanly fasten your couplers, trucks and accessories in HO scale with Kadee® #256 insulating nylon screws. Precision insulating nylon screws in 2-56 size, 1/2" length. Ideal hardware for mounting K...
TCS – Kapton Tape 1/4
from 18.95 $ CAD
from 18.95 $ CAD
Insulate your decoder installations with TCS Kapton (polyimide) tape. Thin, heat-resistant tape ideal for insulating a decoder from a metal chassis, wrapping motors and preventing short circuits du...
Choose Options
Tamiya Masking Tape for Curves 12mm
15.95 $ CAD
15.95 $ CAD
Tamiya 12mm masking tape for curves is designed to mask curved areas and intricate patterns on your models and scale kits.Made from thin, high-quality paper, it conforms to curves and relief, gives...
Sold Out
Walthers – #00-90 Brass Round-Head Machine Screws, 1/4
7.95 $ CAD
7.95 $ CAD
Need clean, sturdy small hardware for your builds?These Walthers brass round-head machine screws (#00-90 thread) are perfect for your models and any device that calls for miniature hardware. Walthe...
Sold Out
Walthers – #00-90 Brass Round-Head Machine Screws, 1/2
7.95 $ CAD
7.95 $ CAD
Need clean, sturdy small hardware for your builds?These Walthers brass round-head machine screws (#00-90 thread) are perfect for your models and any device that calls for miniature hardware. Walthe...
Sold Out
Walthers – #0-80 Brass Round-Head Machine Screws, 3/16
8.95 $ CAD
8.95 $ CAD
Need clean, sturdy small hardware for your builds?These Walthers brass round-head machine screws (#0-80 thread) are perfect for your models and any device that calls for miniature hardware. Walther...
Sold Out
Walthers – #0-80 Brass Round-Head Machine Screws, 3/8
7.95 $ CAD
7.95 $ CAD
Need clean, sturdy small hardware for your builds?These Walthers brass round-head machine screws (#0-80 thread) are perfect for your models and any device that calls for miniature hardware. Walther...

Model B.T.

303 Heriot Street
Drummondville, Quebec
Canada, J2B 1A6

  • Thuesday & Wednesday : By appointment
  • Thursday & Friday : 1pm. to 9pm.
  • Saturday : 10am. to 5pm.
  • Sunday & Monday : Closed

Get directions