DCC electronics and electricity

Bring life and light to your layout: DCC control systems and decoders, ESU LokSound sound decoders and speakers, wire, terminal strips and switches for clean, reliable wiring, building lights and street lamps, signals and lights, plus Woodland Scenics' solder-free Just Plug lighting system. Whether you're moving from DC to digital or adding sound to an existing locomotive, our Drummondville workshop installs decoders, sound and lighting and advises you on compatibility with your equipment. Explore the Digital Command Control (DCC), Wire, terminals and switches and Signals and lighting subcategories.

Modèle B.T.

$3.00 USD

Get reliable insulation and a clean, professional finish with this thin wall heat shrink tubing from Global Tone.This premium thin wall heat shrink tubing from Global Tone is designed to deliver re...

TCS – WOW101 WOWSound Decoder – Steam – 9-Pin / Hardwire

TCS DCC

$114.00 USD

Give your steam locomotive high-definition WOWSound with the TCS WOW101 decoder (steam version). The "101" version hardwires or plugs in via a 9-pin NMRA (JST) harness. Non-looping "Chuffinity" chu...

ESU LokPilot 5 FX DCC Decoder, 8-pin NEM652, Functions Only

ESU

$30.00 USD

The LokPilot 5 Fx DCC is a function decoder with NO MOTOR CONTROL, perfect for installation in control cars (Cab Cars) or rail vehicles that only need lights and/or lighting effects. As the "twin b...

Sold Out

TCS – AS6 DCC Decoder – 6-Function – Drop-In (Atlas HO Switchers)

TCS DCC

$48.00 USD

Take your Atlas HO switcher digital with the 6-function TCS AS6 drop-in decoder. A direct-replacement board designed for the Atlas HO S1, S2, S3 and S4 switchers: it installs with no soldering. "Qu...

Sold Out

Evan Designs

$17.00 USD

Fully assembled LEDs, ready to use, nothing to add.Connect these solid, non-flashing LEDs to any track power source - they work great with 7-19 volts of AC or DC power. Use them for locomotive head...

Sold Out

Atlas

$52.00 USD

Sending your locomotives to the roundhouse? This fully assembled Atlas 9" turntable stops at 21 positions, 15 degrees apart. Features 9" turntable, fully assembled 21 positions, 15 degrees apa...

ESU Adapter Board for BLI Steam Engines with Paragon 3/4 Decoder, 21MTC, with PowerPack

ESU

$52.00 USD

With the help of the BLI Paragon 3/4 (P34) adapter board, H0 scale tender steam locomotives from Broadway Limited (BLI), in which a Paragon 3 or Paragon 4 decoder was factory installed, can finally...

Digitrax

$103.00 USD

Connect your computer to LocoNet and program your decoders.The Digitrax PR4 USB-to-LocoNet Interface with Decoder Programmer switches between computer interface and decoder programming modes automa...

Sold Out

NJ International

$27.00 USD

An authentic signalling detail down at track level.This NJ International GRS SC Type dwarf signal is fitted with Red & Green LEDs and comes in a Gray finish.FeaturesGRS SC Type dwarf signalRed & Gr...

ESU LokSound 5 FX Decoder, 21MTC NEM660, Functions Only

ESU

$92.00 USD

Does your control car need sound but no motor? The LokSound 5 Fx is a special member of the LokSound family: it has no motor output and is specially designed for control cars or dummy heads. By omi...

ESU LokPilot 5 DCC, 21MTC MKL, Gauge H0/0

ESU

$41.00 USD

The LokPilot 5 is the most important member of the LokPilot family and suits almost any locomotive in H0 and 0 gauge. It is offered with all common interfaces. A true multi-protocol decoder, it mas...

ESU LokPilot 5 DCC, 6-pin NEM651, Gauge H0/0

ESU

$37.00 USD

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analogue AC systems. This la...

ESU LokPilot 4 FX micro DCC, 8-pin NEM652

ESU

$37.00 USD

The LokPilot FX micro is an extremely compact function decoder (8.0mm x 7.0mm, only 2.4mm thick, 2.9mm on the capacitor). It fits all N to H0 scale vehicles that need no motor output but should sti...

ESU

$33.00 USD

The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars operated on digital layouts. Two versions are offered: part number 50708 with warmwhite LEDs and p...

$4.00 USD Off

Soundtraxx

$9.00 USD

~~$13.00 USD~~

"Mega" oval speaker measuring 2.8 × 4 cm (1.10 × 1.57"), with an 8-ohm impedance. Its large size delivers powerful sound for models with more room. Features Oval shape, 2.8 × 4 cm (1.10 × 1.57") 8...

Soundtraxx

$3.00 USD

Sealing gasket for 28 mm (1") round speakers. It improves acoustic performance by sealing the speaker to its baffle. Features Designed for 28 mm (1") round speakers Improves sealing and sound qual...

DCC electronics and electricity

Model B.T.

Shopping Cart

Location

Model B.T.